Industry dynamics

NEWS CENTER

How to control and maintain the temperature of UPS uninterruptible power supply?



      UPS uninterruptible power supplyA system is an uninterruptible power supply system that uses an inverter as the main component, energy storage devices (usually batteries), and constant voltage and frequency output. During use, protection is a very important operation. It can not only effectively prevent machine failures, but also improve the service life of the machine. During the operation of UPS power supply equipment, in addition to cooling the fan and circuit breaker switch components, there are also a large number of solid-state electronic devices. These electronic devices are not subject to machine wear, but they are greatly affected by the surrounding temperature.

Therefore, we need to do a good job in temperature control of UPS.Haibo Electric UPS operates in the same environment as computers, with temperature control above 0 ℃ and below 40 ℃; Control the humidity below 95%. Of course, equally important as these factors is to keep the UPS power room clean: dust-free, pollution-free, and free from harmful gases. Because these factors have the same impact on the service life of UPS, they can also cause problems. In the daily protection operation of UPS, engineers need to conduct routine inspections every day, with the main purpose of accumulating the normal operation of UPS power supply and timely discovering fault signs. Therefore, daily routine inspections should be cautious.

Haibo Electric (HB-S series) is a UPS uninterruptible power supply system based on lithium iron phosphate battery packs. It is newly designed, energy-saving, efficient, safe and reliable, green and environmentally friendly, fully digital controlled, and can provide the highest efficiency uninterruptible power supply guarantee for various loads.

海博电气UPS不间断电源

       As a backup battery application for industrial power supply, the HB-LiFePO4 industriallithium iron phosphate battery packcan provide safe and reliable power supply guarantee for UPS.

海博电气磷酸铁锂电池组

       (1) Voltage level: 36V~1000V. Determine based on the actual DC bus voltage of UPS/EPS.

        (2) Battery pack capacity: 20Ah~2400Ah flexible configuration.

        (3) Selecting UPS/EPS with high magnification cell configuration that requires short-term high-power output, the battery capacity can be reduced to 1/2 of lead-acid batteries.

        (4) No memory effect, charging and discharging as needed.(5) 15 years of ultra long service life, with the same lifespan as UPS/EPS hosts.

【 Related article recommendations 】

       HB-S6000-G series 10-80kVA pan industrial UPS

       HB-S6000 (10-80kVA) UPS power supply | Technical parameters of uninterruptible power supply

       Distinguishing between EPS emergency power supply and UPS uninterruptible power supply (Part 1)

       How to prevent UPS power supply accidents from occurring?

       Characteristics of Haibo Industrial UPS Power Supply


>