As is well known, the increase in altitude and the decrease in temperature, humidity, and even strong winds can pose challenges to the use and maintenance of UPS power supplies. For areas with an altitude exceeding 1000m, the insulation performance of UPS power supplies deteriorates, and the use of air cooling for heat dissipation results in reduced power and backup time. Even solar radiation can cause aging of UPS equipment materials.

       So what are the issues we need to pay attention to when using UPS power in high-altitude areasWhen choosing UPS power supply, attention should be paid to brand selection. Some UPS uninterruptible power supplies do not support use in high-altitude areas.

1. Electronic components are affected by high-altitude factors, and there is a common technical characteristic of reducing their usage. We do not need to consider this issue within the range of 1000 meters above sea level. For every 1000 meters above sea level, we should consider a 10% reduction in equipment usage.

2. All electronic devices are generally matched based on around 80% of the operating power consumption when running on the device. Therefore, in the early stage of device selection, we should reasonably calculate the actual power consumption of the device and match it with the corresponding model.

3. Select or customize UPS power products with larger safety clearance to avoid internal ignition faults in the circuit.In summary, altitude does have an impact on the use of UPS equipment. If you have a project that requires the use of UPS power in high-altitude areas, you must consider whether the selected brand can meet the usage requirements.

【 Related article recommendations 】

       How to control and maintain the temperature of UPS uninterruptible power supply?

       The difference between UPS uninterruptible power supply and regulated power supply

       Introduction to HB-S6000 series 100-600kVA UPS products

       Identify a reputable manufacturer of UPS uninterruptible power supply, Haibo Electric